Tips, Tricks and Information on
MACHINE EMBROIDERY



Showing Tag: " embroidery machine tension" (Show all posts)

HOW TO CHECK THE TOP THREAD TENSION AND INTERPRET THE RESULTS

Posted by Myra Bosch on Saturday, January 9, 2010, In : Machine Embroidery Problems 

Is your embroidery machine too tense, a little high-strung, always going off at the smallest thing? Or is it too laid back, lackadaisical and lazy about its job? Or is it on a nice even, steady-as-she-sews path?

If the top thread tension is off on your machine, your embroidery will never be right, no matter how diligent you are about changing needles, choosing thread, hooping and selecting only quality digitized designs. Your work will not be up to par if the top thread tension is out.

Here's h...
Continue reading ...
 

HOW TO ENSURE CORRECT THREAD TENSIONS

Posted by Myra Bosch on Saturday, October 24, 2009, In : Machine Embroidery Problems 

A good way for beginners (or those who knew and forgot) to check their tensions is to look at the back of the embroidery. About 1/3 of the thread - the center third -should be bobbin. If the bobbin thread spreads to the edge, then either your top tension is too tight, or your bobbin tension is too loose. Conversely, if not very much bobbin shows, your top tension is too loose or your bobbin tension is too tight.

If you have more than one needle per head, here is how you can determine which ten...
Continue reading ...
 
 

embroidery machine prices
Copyright © 2010-2015
Embroiderysoftware.co.za | Maintained by Creative Notions (Pty) Ltd
All rights reserved.